Jonathan Burrows

[Jonathan Burrows]

From 5-7

Which of the following are possible mechanical causes of no-drain problems? (Select all that apply)

[Jonathan Burrows]

Next set, on 5/2

: In this unit’s video on the Bosch dishwasher, which components were part of the heating circuit?

What does it mean when you measure a good voltage supply to a circuit but have 0 amps? (Select all that apply)

The second question I think I didn’t select both of the options. But the first one I am not sure. I did name the four I thought it was.

[Jonathan Burrows]

Will need a reset for this one. Thought my LOI since the task takes a while would be the bi metal or the value in the oven, however both of those are wrong.

I would love some explanation on this and what the problem is for 10-3’s test. Thank you Miss Susan!

[Jonathan Burrows]

I did mean the Iceball Question, My bad there.

Thank you so much, Its a lot and I am just trying to keep everything straight and get through this course.

[Jonathan Burrows]

Thank you, I got to 3-7 and the videos with everyone talking makes it way harder to focus and pull information out. But for 3-7 I missed 3, thought I had the answer, and was wrong, so need help with these guys.

What are some “non-invasive” and zero disassembly methods for half-splitting a warm refrigerator problem between the sealed system and everything else? (Choose all that apply)

With a low side leak, how would you expect the high side pressure to compare to normal?

With a complete capillary tube restriction, how would you expect the compressor run current to compare to normal?

I missed all three of these, and I am confused. I thought I had it right.

[Jonathan Burrows]

Also, on 3-6, I was not sure the answer to this question

What are some “non-invasive” and zero disassembly methods for half-splitting a warm refrigerator problem between the sealed system and everything else? (Choose all that apply)

I thought checking the pressure and the amps was non invasive, what am I forgetting?

[Jonathan Burrows]

Hello Miss Susan, another question for you.

My Danfloss app is slightly off, did numbers adjust or something? Its not far off, some times only a couple of tenths for pressure, but I was running into it a great deal. Should I be worried about it?

[Jonathan Burrows]

Thank you so much for answering. I saw the Email, and now on to the next Mod today!

[Jonathan Burrows]

From 2-8

Why does the voltage drop across a thermistor change as its resistance changes?

Because of the relation with Ohms law, as the resistance changes and the current says constant, the voltage drop would have to change, but I cannot figure out this question.

What does “load mode” do in a Samsung refrigerator?

It is the diagnostic mode that helps you trouble shoot, retrieve error codes, and learn what the board this is wrong to help direct fixes.

Not sure why I missed these, I think I am right, and thought I misread a question, but now I am stumped and not sure if this is right anymore.

• This reply was modified 1 month ago by Jonathan Burrows. Reason: forgot module and lesson

[Jonathan Burrows]

I misread compressor as condenser twice, and that was the the crux of the problem. Thank you so much, I appreciate your time, I will ping you if I have another question through this course.

[Jonathan Burrows]

Okay, Thank you so much for adding that clearity

[Jonathan Burrows]

Also need help with Unit 6 Test Questions 9 and 12 please

[Jonathan Burrows]

Thank you Miss Brown, and they will be kept for me ^.^

[Author]

Posts